MagniLink Vision | FAQ

Can I change the height of the screen?

Yes, the screen is height adjustable to fit the user’s most comfortable viewing position. Place your hands on the soft touch coating on both sides of the screen and slide it up or down. You can also tilt the screen.

What accessories are available for MagniLink Vision?

We offer a DVI switch as an accessory to MagniLink Vision with the 5 Push panel.
With this device a computer can be connected to MagniLink Vision. The computer image will be shown on the screen of MagniLink Vision. To switch between the camera image and the computer image simply press and hold the autofocus lock button for three seconds, or press the button on the switch box.

How does the module system work?

In all models the reading table, stand and electronics are the same, then it is up to the user to decide what camera, screen size, control panel and features to add.
1. Choose your camera of preference: High Resolution camera or a HD camera.
2. Choose your screen size of preference: 18,5” HD or 23” full HD screen.
3. Choose your preferred control panel: “3 Push”, “5 Push” or “2 Turn knob”.

Which models of MagniLink Vision are available?

Thanks to the module system, MagniLink Vision offers 12 different models to help you find a system after your own preferences. For help with picking out a specific model, please contact your local dealer or see more at www.lvi.se.

What is the difference between a High Resolution and a High Definition camera?

Both cameras are based on the latest technology with full digital image transfer. The High Resolution is to be compared with the most common used standard cameras and besides the image transfer it also provides more TV-lines (550 instead of 460) and that itself results in a better resolution. For user with Retinis Pigmentosa (RP) that are looking for a sharp image in low magnification or desire a greater overview a High definition camera is to recommend.

What extra functions does the “5 Push” panel have compared to the “3 Push” and “2 Turn Knob” panel?

The “3 Push Panel” and “2 Turn Knob Panel” has controls for on/off, magnification, natural and artificial colours. The “5 Push Panel” offers more functionality for an optimal picture and reading mode; guiding line, change of contrast and focus lock. It can also be used with the DVI switch and for lighting configuration.

What does DPC stand for?

Dynamic Picture Control (DPC) will reduce lighting from the unit and is useful for people who are light sensitive. It will also be the best choice for reading medicine boxes and cans etc.

What does ROPC stand for?

ROPC stands for Reading Optimized Picture Control (ROPC). Each product is individually tested for optimized picture quality. The user can also personalize the unit further for any special needs. ROPC will adjust colour and contrast and minimize flicker or ghosting for every situation.

What does End User Configuration (EUC) stand for?

EUC is a configuration program in that the distributors individually can modify the settings according to the user. The settings are magnification (max + min), guiding line (colour + thickness), lighting and how many colours to use.

Is it normal that the light slowly flashes yellow when the unit is turned off?

Yes, when the system is in standby mode. When you turn on the system it flashes green and during usage it is constantly green.

Will the unit start with the same settings as before I turned it off?

Yes, if you turn off the system with the off button. If you pull the cord or you are having a power outage, the settings will not be saved.

Is it normal that the autofocus motor is slower while focusing and faster if the autofocus is off?

Yes, that is normal.

Why does the red switch light suddenly flash yellow?

The reason is that the autofocus is locked in a fixed position. A yellow lasting light means that the system is not using the default settings.

Can I change the lamps of the system myself?

No, the LEDs have extremely long life. If they need to be changed, contact your distributor.

How do I lift the system?

You should not lift the system by holding the lamp houses, the screen or any plastic parts. It is best to lift the system in the basic structure, for example the arms that go out to the lamp houses.